一起了解SJQ、PJQ機型切角機傳動原理
發布時間：2020-10-15
瀏覽次數：726
切角機是由機座、機頭、減速箱、工作臺、切角刀、拖板等零部件組成。
切角機電機通過減速箱減速后，帶動飛輪旋轉，當扳下操作手柄（圖（2）中14）或踩下踏板（圖（2）中19）時，開關座（12）即與飛輪（11）嚙合，從而使偏心輪（3）轉動，再通過連桿（2）帶動切角刀（15）作上下裁切運動。
This machine is made up of parts and components such as machine seat, machine head, speed reduction box, worktable, cutter and towing board.
After the motor decelerates through the speed reducer, it drives the flywheel to rotate. When the handle is pulled down(14 in Figure 2) or the pedal is stepped down(19 in Figure 2), the switch seat(12) is engaged with the flywheel(11)., In this way, the eccentric wheel(3) is rotated, and then the cutting cutter(15) is driven by the connecting rod(2) for up and down cutting motion.
傳動原理示意圖
Figure(2) A schematic diagram of transmission principle
|
1. 1.連桿 Connecting rod |
2. 2.偏心輪 Eccentric wheel |
3.7.8.銅套 Copper cover |
4.手柄 Handle |
|
5.主軸 Principle axis |
6.開關座 Switch seat |
9.機身后蓋 Fuselage cover |
10.減速機法蘭 Flange reducer. |
|
11.電機 electric motor |
12.飛輪 flywheel |
13.保險支架 Insurance stent |
14.開關支架 Switching support |
|
15.工作指示燈 Work indicator light |
16.啟動開關 Start switch |
17.百葉門板 Leaf doors and Windows |
18.壓紙架 Prepress |
|
19.切角刀具 Cutting tool |
20.拖板 Drag board |
21.角尺板 Angle ruler |
22.銅墊 Copper mat |
|
23.工作臺 workbench |
24.機座 Block |
25.腳踏板 Pedal |
|
微信 二維碼